Journal of Material Cycles and Waste Management

Once you click the homepage of this journal, you can read abstracts on line.
(https://link.springer.com/journal/volumesAndIssues/10163)

Call for Papers

General

In order to submit a paper to this journal, please click
(http://www.editorialmanager.com/jmcw/default.aspx)

Call for Papers: Special issue of the 9th 3RINCs2023

We are pleased to invite you to submit a manuscript for Special Issue of Journal of Material Cycles and Waste Management (JMCWM) on the 9th 3R International Scientific Conference on Material Cycles and Waste Management (3RINCs) 2023. The 9th 3RINCs Special Issue welcomes submission of original articles from 1) General sessions and 2) Special sessions.

●Deadline for paper submission : 31 May, 2023 

●Guidelines  : For more information, please click on the link below.
https://jsmcwm.or.jp/international/files/2023/04/Call-for-Papers-3RINCs2023_230326_MTs0327.pdf

Call for Papers: Special issue of “Plastic flow and its management”

The deadline for the special issue of ”Plastic flow and its management” will be extended to June 30th 2023.

The Journal of Material Cycles and Waste Management (IF 3.579 of 2021), which is the peer-reviewed journal of the Japan Society of Material Cycles and Waste Management (JSMCWM) and the Korea Society of Waste Management (KSWM), is currently running a Special Issue entitled ” Plastic flow and its management “. Prof. Toshiaki Yoshioka (Tohoku University), Prof. Masahiro Osako (National Institute for Environmental Studies), Prof. Taku Fujiwara (Kyoto University), Prof. Masashi Yamamoto (Tokai University), Prof. Hirofumi Nakayama (Kyushu University), Prof. Kazuyuki Oshita (Kyoto University), Prof. Jun Nakatani (The University of Tokyo), Dr. Go Suzuki (National Institute for Environmental Studies), Prof. Shogo Kumagai (Tohoku University) and Misuzu Asari (Kyoto University) are serving as responsible editors for this issue. We expect you could make an excellent contribution based on your expertise and recent achievements in following areas;

[1] Quantification and qualification of plastics litter and micro plastics
[2] Plastic cycles and risks in the environment
[3] Plastic flow analysis
[4] Life cycle management of plastics
[5] Technology of plastic management
[6] Chemical feedstock recycling of polymeric materials
[7] New policy, legal framework of plastic management

●Deadline for paper submission : June 30th 2023 (extended)

●Guidelines  : For more information, please click on the link below.
https://jsmcwm.or.jp/international/files/2022/12/Call-for-Papers-S-19-Plastics20221111_JNMASS221213.pdf

 

The Latest Journal 

Vol.25, Issue 3, May 2023

https://link.springer.com/journal/10163/volumes-and-issues/25-3

      1. REVIEW
        “Practical ways to recycle plastic: current status and future aspects“, Kailash Pati Pandey, Ujjwal R. Jha, Jeetesh Kushwaha, Madhumita Priyadarsini, Siddharth U. Meshram & Abhishek S. Dhoble ……… Pages: 1249–1266

      2. REVIEW
        “Challenges of textile waste composite products and its prospects of recycling“, Md. Ehsanur Rashid, Md. Rubel Khan, Raihan Ul Haque & Md. Hasanuzzaman ……… Pages: 1267–1287

      3. REVIEW
        “Effective and innovative procedures to use phosphogypsum waste in different application domains: review of the environmental, economic challenges and life cycle assessment“, Brahim Bouargane, Khaoula Laaboubi, Mohamed Ghali Biyoune, Bahcine Bakiz & Ali Atbir ……… Pages: 1288–1308

      4. REVIEW
        “        Global variability of food waste chemical composition and its consequences on the production of biofuels and chemical compounds“, Íthalo Barbosa Silva de Abreu, Maria Helena de Sousa, Andressa Pereira da Silva, Carlos Eduardo de Araújo Padilha, Aldo Torres Sales, Antonio Samuel Alves da Silva, Emmanuel Damilano Dutra & Rômulo Simões Cezar Menezes  ……… Pages: 1309–1324

      5. ORIGINAL ARTICLE
        “Obtaining and characterization of catalytic materials from waste tires for the Fischer–Tropsch process“, Sebastian Amar-Gil, Alba N. Ardila-Arias & Rolando Barrera-Zapata ……… Pages: 1325–1332

      6. ORIGINAL ARTICLE
        “Assessing the implementation effect of Shanghai’s compulsory municipal solid waste classification policy“, Xu Chu, Zhujie Chu, Wei-Chiao Huang, Youquan He, Mengqing Chen & Maierheba Abula ……… Pages: 1333–1343

      7. ORIGINAL ARTICLE
        “Multi criteria decision analysis to develop an optimized municipal solid waste management scenario: a case study in Ulaanbaatar, Mongolia“, Delgermaa Gombojav & Toru Matsumoto ……… Pages: 1344–1358

      8. ORIGINAL ARTICLE
        “Biochar and cattle manure amendments improve the quality of green waste compost as growing substrate for Centaurea cyanus“, Tianyu Song & Lu Zhang …… Pages: 1359–1368

      9. ORIGINAL ARTICLE
        “Study on the co-combustion process and mercury emission characteristics of sewage sludge-coal slime coupled fuel“,Li Jia, Peng Cheng, Yue Yu, Yan-lin Wang, Shi-hu Chen, Chen-xing Wang, Jian-cheng Wang, Jian-chun Zhang, Bao-guo Fan & Yan Jin …… Pages: 1369–1389

      10. ORIGINAL ARTICLE
        “Can millennials’ disposal intention be influenced through institutional motivation: A study of green disposal conduct in Perak, Malaysia        “, S. S. Dhanabalan, Rajah Rasiah & Santha Chenayah …… Pages: 1390–1403

      11. ORIGINAL ARTICLE
        “Effects of olive mill wastewater and olive mill pomace on soil physicochemical properties and soil polyphenols“, Nawal Mekersi, Dalila Addad, Kenza Kadi, Silvia Casini, Davorka K. Hackenberger, Abdecharif Boumaza & Sabrina Lekmine …… Pages: 1404–1416

      12. ORIGINAL ARTICLE (Open Access)
        “Influence of combined aging on the mechanical and physical properties of reclaimed asphalt pavement mixtures blended with rejuvenator agents“, Masahiko Iwama & Kimitoshi Hayano …… Pages: 1417–1433

      13. ORIGINAL ARTICLE
        “Physicochemical and nutritional features of Gleditsia japonica shell biochar under different pyrolysis conditions“, Zhifang Zhao, Hongling Zhang, Xiulan Pang, Lingling Sun & Yunsi Duan …… Pages: 1434-1443

      14. ORIGINAL ARTICLE
        “Characterization of polypropylene composites using sludge waste from the natural rubber latex industry as reinforcing filler“, Chatree Homkhiew, Chainarong Srivabut, Thanate Ratanawilai, Surasit Rawangwong & Suchart Chantaramanee …… Pages: 1444–1456

      15. ORIGINAL ARTICLE
        “Effect of plasticizer dosage on properties of multiple recycled aggregate concrete“, Jeonghyun Kim, Sungchul Yang & Namho Kim …… Pages: 1457–1469

      16. ORIGINAL ARTICLE 
        “Recycling of waste tire by pyrolysis to recover carbon black: an alternative reinforcing filler“, Sangit Paul, Manjur Rahaman, Suman Kumar Ghosh, Ankur Katheria, Tushar Kanti Das, Shailendra Patel & Narayan Ch Das …… Pages: 1470–1481

      17. ORIGINAL ARTICLE
        “Effects of autoclaved aerated concrete powder admixture on compaction and shear strength characteristics of wet filter cakes“, Liangtong Zhan, Ziang Wang, Shunyu Wang, Zhuofeng Li & Yunmin Chen …… Pages: 1482–1497

      18. ORIGINAL ARTICLE
        “Effects of EDTA on the accelerated carbonation behavior of steel slag used as cementitious materials“, Taiyue Chen, Yu Xue, Xin Zhao & Jiaxiang Liu …… Pages: 1498–1508

      19. ORIGINAL ARTICLE (Open Access)
        “Recycling and valorization of distilled grape marc through vermicomposting: a pilot-scale study“, María Gómez-Brandón, Marta Lores & Jorge Domínguez …… Pages: 1509 – 1518

      20. ORIGINAL ARTICLE 
        “A performance study on asphalt concrete mixes with different waste materials as modifiers in pavement application“, T. B. Vishnu & Kh. Lakshman Singh …… Pages: 1519–1533

      21. ORIGINAL ARTICLE
        “Novel approach for in situ recovery of cobalt oxalate from spent lithium-ion batteries using tartaric acid and hydrogen peroxide“, Qian Cheng, Barbara Marchetti, Mingfang Chen, Jun-Tao Li, Jiayi Wu, Xiangyu Liu & Xiao-Dong Zhou …… Pages: 1534–1548

      22. ORIGINAL ARTICLE
        “Hazardous bauxite red mud and ferrous slag management to produce sustainable construction materials“, Vsevolod Mymrin, Kirill Alekseev, Walderson Klitzke, Daniela de Evaniki, Cleber L. Pedroso, Fernando H. Passig, Karina Q. Carvalho, Charles W. I. Haminiuk & Rodrigo E. Catai …… Pages: 1549–1559

      23. ORIGINAL ARTICLE
        “Enhancing the economic potential of organic waste by co-composting using ratio modelling toward a circular economy“, Muriel Naa Lamiokor Ofei-Quartey, Eugene Appiah-Effah, Kofi Akodwaa-Boadi, Barnabas Ampaw, Theodora Sophia Taylor & Zouma Emeline Nadège Millogo …… Pages: 1560–1580

      24. ORIGINAL ARTICLE
        “Use of detoxified MSWI fly ash for cement stabilized macadam mixture: mechanism, mechanical and environmental considerations“, Jingruo Li, Ruiquan Liu, Boming Tang, Dongchang Zhang, Junliang Feng, Huoming Wang & Mengzhen Zhao …… Pages: 1581–1593

      25. ORIGINAL ARTICLE
        “Investigating barriers to sustainable management of construction and demolition waste: the case of India“, H. Devaki & S. Shanmugapriya …… Pages: 1594–1607

      26. ORIGINAL ARTICLE
        “Understanding citizens’ perception of waste composting and segregation“, Made Adi Widyatmika & Nomesh B. Bolia …… Pages: 1608–1621

      27. ORIGINAL ARTICLE
        “Characterization of coal gangue and coal gangue-based sodalite and their adsorption properties for Cd2+ ion and methylene blue from aqueous solution“, Cheng Wang, Kai Feng, Lipeng Wang, Qianru Yu, Fuling Du & Xiaolu Guo …… Pages: 1622–1634

      28. ORIGINAL ARTICLE (Open Access)
        “Distribution flow of used motorcycles exported from Japan“, Mami Kimura & Takumi Yamane …… Pages: 1635–1644

      29. ORIGINAL ARTICLE 
        “Synthesizing of magnesium and nickel nanoparticles from spent methane dry reforming catalyst using sol–gel method: process flow diagram development“, Fateme Razazan, Hadi Abdollahi, Faramarz Doulati Ardejani, Mahdi Gharabaghi & Sina Ghassa …… Pages: 1645–1657

      30. ORIGINAL ARITICLE (Open Access)
        “The behaviour of selected rare-earth elements during the conversion of phosphogypsum to calcium sulphide and residue“, Nsaka Ntumba Christophe, Rob McCrindle, Jannie Maree & Veronica Ngole-Jeme …… Pages: 1658–1671

      31. ORIGINAL ARITICLE
        “A comparison of the comprehensive municipal solid waste management systems of the region of Prague and the principality of Asturias. the influence of collection systems and municipality size on the waste collection and the recycling rates“, Héctor Muñiz Sierra, Mercedes Díaz-Somoano, Michal Šyc, Anastasia Shtukaturova, José Manuel González La Fuente, Patricia Díaz Baizán & Laura Megido …… Pages: 1672–1687

      32. ORIGINAL ARITICLE
        “Slow pyrolysis of olive mill solid residues as a sustainable valorization strategy for waste biomass“, Lea Piscitelli, Daniel P. Rasse, Anna Daniela Malerba, Teodoro Miano & Donato Mondelli …… Pages: 1688–1698

      33. ORIGINAL ARITICLE (Open Access)
        “Potential of microalgae Bio-Coke as a sustainable solid fuel alternative to coal coke“, Vidya Cundasari Koesoemadinata, Shunsuke Nakamura, Nur Syahirah Kamal Baharin, Wira Jazair Yahya, Muhamad Ali Muhamad Yuzir, Koji Iwamoto, Kengo Suzuki, Tamio Ida, Fazrena Nadia Md Akhir, Nor’azizi Othman & Hirofumi Hara …… Pages: 1699–1709

      34. ORIGINAL ARITICLE
        “        Removal of iron from waste printed circuit board dust: surfactant assisted magnetic separation versus selective leaching routes“, Oluwayimika Olasunkanmi Oluokun & Iyiola Olatunji Otunniyi …… Pages: 1710–1718

      35. ORIGINAL ARITICLE 
        “        Mechanical properties and microstructure of ground granulated blast furnace slag-based geopolymer reinforced with polyvinyl alcohol fibers“, Ting Yu, Jiarong Chen, Haozhe Guo, Baifa Zhang, Xibin He, Anmin Zheng, Qiang Wang & Peng Yuan …… Pages: 1719–1731

      36. ORIGINAL ARITICLE 
        “Solid-state bioconversion of organic wastes into compost as bio-organic fertilizer by screened fungal isolates and its performance in agronomic usage        “, Abul Hossain Molla, Nur Muhammad Manik, Md. Manjurul Haque, Md. Amdadul Haque & Md. Moinul Hosain Oliver …… Pages: 1732–1745

      37. ORIGINAL ARITICLE 
        “Characterization and recycling of lithium nickel manganese cobalt oxide type spent mobile phone batteries based on mineral processing technology        “, İlyas Emir Çuhadar, Fulya Mennik, Nazlım İlkyaz Dinç, Alim Gül & Fırat Burat …… Pages: 1746–1759

      38. REGIONAL CASE STUDY
        “Intensity of hospital waste generation and disposal in the selected hospitals in Kerala, India: an analysis based on hospital ownership        “, K. L. Savitha & T. J. Joseph …… Pages: 1760–1770

 

back to pagetop